Central Reverse Osmosis Water Purifier Machine:
* Automatic washing cycles (Auto Flush)
* Recycling of produced water and prevention of excessive sewage
* Digital sensors for inlet water and sewage flow rate
* Digital sensors for pre-purifier and membrane pressure
* sensor for conductivity, TDS and water temperature
* Audio alarm and automatic function in case of disruption
* Easy access to parts for maintenance and repairs
| Device Identification | |||||
| Central Reverse Osmosis (R.O.) Water Purifier | Name | ||||
| AVISA-400, AVISA-800, AVISA-1200, AVISA-1600, AVISA-2000 | Models | ||||
| 400 to 2000 liter/hr. , suitable for 6 to 30 dialysis bed | Nominal Capacity | ||||
| Based on Medical Equipment Standards IEC60601-1 | Standard | ||||
| Installation Requirements | |||||
| Sq. m | 12-15 | Area | Water Treatment Plant Room | ||
| Volt | Three-phase Power (380 V), supported with a UPS system | Electricity | |||
| To the urban sewage | Drain | ||||
| 1.5 Width, Soundproof | Door | ||||
| Soundproof | Window | ||||
| 20ºC and with no humidity | Ventilation | ||||
| ppm | <1500, In | TDS | Inflow Water | ||
| 10-35 | Temperature | ||||
| bar | 3-5 | Pressure | |||
| 6-8 | PH | ||||
| ppm | 0.5 | Chlorine | |||
| R.O. Main Unit | |||||
| 1500 mm× 660 mm× 500 mm | Dimensions (Width× depth× height) | ||||
| Stainless Steel or Fiberglass | Pressure Vessel | ||||
| To control intake water to membrane | Bypass Valve | ||||
| High Quality Stainless Steel pump | Multistage Pump | ||||
| Produced Water Specifications | |||||
| Produced Water Specifications | 400 to 2000 | Capacity | |||
| Lit/hr | 2-4, Adjustable | Outflow Pressure | |||
| Bar | 70-85 | Recovery percentage | |||
| % | Standards | ||||
| ANSI/AAMI RD62 | |||||
